Exhibitors

CRN series Split Cooling Units are produced in a fully customisable way in accordance with cold and frozen storage needs. Hermetic type split cooling units are suitable for market and small capacity facilities, while industrial cooling units are suitable for high capacity cooling facilities. In addition to operating smoothly even in high outdoor temperatures with standard models, the device design can be changed according to the needs for tropical regions.

Air cooled chillers are designed for use in process cooling and air conditioning systems. With its wide product range, it is safely used for temperature control of machines in factories. It is generally used in different areas of the plastics industry such as injection, extrusion, thermoforming and blow moulding, as well as in processes that generate high heat during production such as cutting oils, welding process, mould, casting, machine tool industry, chemical processes, pharmaceuticals, food and beverage, paper and cement, vacuum systems, X-ray processes, power supplies, power plants, laboratories, semiconductors, compressed air and gas cooling, MR machines and lasers. The chiller devices we produce are generally used in industrial applications at cold water temperatures between 5 °C and 25 °C.

Our standard (CUBIC TYPE) cold room evaporators are produced in SK (3/8), SM and SO (1/2), SN and SP (5/8) models with 4-6-8-10 (mm) pitch with a wide capacity range. Our ceiling type cold room evaporators are produced in CK (3/8), CM and CDM (1/2) models with a wide capacity range of 4-6-8 (mm) pitches in one direction in small-sized rooms and in two directions in working environments and where low air velocities are preferred. Blast freezers are produced in 3 different models as ceiling type, multi-storey type and tunnel type with a wide capacity range of 10-12 (mm) pitch.

They are designed according to cooling capacities with less noise level and energy consumption. Dry type closed circuit water coolers are used for cooling process water with outside air. The water temperature obtained in dry coolers depends on the dry bulb temperature of the environment; chilled water can be obtained up to about 5°C above the dry bulb temperature. Depending on the area of use, it can be vertical, horizontal, sandwich and V-type. We produce alternative solutions for low cost, low energy consumption and difficult climatic conditions in Dry Cooler products. It is generally used in different areas of the plastics industry such as injection, extrusion, thermoforming and blow moulding, as well as in processes such as cutting oils, welding process, mould, casting, machine tool industry, chemical processes, pharmaceuticals, food and beverage, paper and cement, vacuum systems, power supplies, power plants, semiconductors.